Blog

Good news!

Posted by Chandler Slavin on Oct 16, 2012 4:52:00 PM

Good news everyone!

The progress that is being made in recycling thermoforms will be available to the public sometime next week in the appendix of APRs/NAPCORs Report on PET Container Recycling Activity. Look out for it!

I am working on an abstract of my report on recycling thermoforms for publication in PlasticsNews. Upon its completion, I will post it here, so you—my packaging and sustainability friends—can read it first!

Have a splendid afternoon!

Read More

Misc. updates FUN

Posted by Chandler Slavin on Oct 16, 2012 4:44:00 PM

Happy Monday Funday!

Before I get to the meat of today’s post, which will either discuss biodegradable plastics OR the SPC meeting (I haven’t decided yet...) I wanted to provide you with a recap of Dordan’s various sustainability initiatives and miscellaneous tid bits…

Read More

Design for Recyclability: bottles first, thermoforms next?

Posted by Chandler Slavin on Oct 16, 2012 3:02:00 PM

Read More

PET exports and EPR?

Posted by Chandler Slavin on Oct 16, 2012 2:43:00 PM

Hello my packaging and sustainability friends! It is great to be back. The wedding was a wonderful affair; everyone had a gay ole time!

Look how pretty the Bride is, who coincidently, is this sister of the author of this blog!



I’m so proud!

Anyway, enough emotional embellishments, let’s get down to business.

Prior to leaving for the wedding, I sent out a boat load of emails, inquiring into this and that. The first I sent was to my contact in the government who works on waste management policy: I inquired into the amount of plastic bales exported out of the country each year. Because the supply and demand balance is a bit disproportionate in North America (HUGE demand; limited supply due to limited collection and quality), a colleague suggested limiting the amount of PET recyclate that leaves the country. Here’s what I wrote:

Greetings my friend!

Hello!

How goes it?

Do you know how much plastic scrap is exported in Canada each year? Do you know of any legislation or initiatives that look to restrict the amount of plastic bales leaving the country? Or, better yet, do you know anyone that would know this information that you could refer me to?

In addition, your MetroWaste calendar said it no longer collects thermoforms via Blue Box program. Is this true? If so, do you know why? Do you have any contacts at MetroWaste that would be able to explain why certain materials are collected and others are not?

Thanks my lady!

Best,

Chandler

And several hours later, I received the following response:

Chandler ,

To answer your questions – we would have no clue how much plastic is exported from Canada every year. To be honest, we have a hard time tracking how much waste is exported, and that’s better tracked than recyclables. The closest we have is a 2007 report from Waste Diversion Ontario , which attempted to track the fate of residential blue box materials. You’ll see that they had many gaps in information, and were only looking at residential materials, not IC&I. But you might be able to find something in here http://www.wdo.ca/files/domain4116/Review%20of%20Blue%20Box%20Material%20Destinations%20Report%20Dec%2014,%202007.pdf???

As for my waste calendar (and to clarify, it’s for the City of Toronto . Metro Waste is a private company), yes it’s true that they aren’t accepting thermoform plastics, and when I called the general city hotline they told me they haven’t accepted them for awhile. I’m not sure of the exact reason, but I’d guess that it’s because they take up lots of space, are difficult to sort, don’t have great end markets, etc. You know the usual. I got a name of someone at the City you could call though…

Have a good weekend!!

The Metro Waste calendar my contact was referring to is literally a calendar, which is distributed to residence of Toronto and explains what materials/packaging types are collected for recycling and what are not. While staying at my friend’s house in Canada, I had the luxury of pursuing said calendar and was surprised to learn that the Blue Box program does not collect thermoforms. I found this surprising because several food-packaging thermoformers have recently released press pieces that explain how they will now be buying, cleaning, and extruding thermoforms into second generation thermoforms. How is this true if Canada, which has a much much better packaging diversion rate, doesn’t even collect and bale these materials for post-consumer market?

And, for your viewing pleasure, I thought I would include some of OUR EPR legislation. This stuff comes from California and helps put into context the way some of this legislation works. You can subscribe to this organization so you receive updates of all EPR legislation in California; oh boy!

-----Original Message-----

From: EPR@calrecycle.ca.gov [ mailto:EPR@calrecycle.ca.gov]

Sent: Thursday, June 17, 2010 8:00 PM

To: cslavin@dordan.com

Subject: CA Product Stewardship Bills: Legislative Update

CalRecycle Extended Producer Responsibility

This is an update on the product stewardship bills in the California Legislature.? This information is constantly changing.? Bills may be tracked at http://www.leginfo.ca.gov.

- SB 1100 (Corbett) Product stewardship: household batteries. Introduced Feb. 17, 2010 .? Last amended June 15, 2010 .? This bill would require producers of household batteries to, among other things, submit, individually or through a stewardship organization, a product stewardship plan to CalRecycle.? This bill is active and currently in the Assembly Committee on Environmental Safety and Toxic Materials.

- AB 1343 (Huffman) Solid waste: architectural paint recovery program.? Introduced Feb. 27, 2009 .? Last amended in the Senate on July 13, 2009. This bill would create the Architectural Paint Recovery Program and require paint manufacturers to, among other things, develop and implement a program to collect, transport, and process postconsumer paint to reduce the costs and environmental impacts of the disposal of postconsumer paint in California.? This bill is currently held under submission in the Senate Appropriations Committee.

- AB 2139 (Chesbro) Solid waste: product stewardship. Introduced Feb. 18, 2010 .? Last amended June 1, 2010 . This bill would create the California Product Stewardship Act and would require, among other things, CalRecycle to submit a report to the Legislature with recommendations on products to include in a product stewardship program.? This bill failed passage from the Assembly Appropriations Committee and is no longer active.

- AB 2176 (Blumenfield) Hazardous waste: lighting products. Introduced Feb. 18, 2010 .? Last amended April 22, 2010 .? This bill would create the California Lighting Toxics Reduction and Jobs in Recycling Act and require producers of certain lamps to, among other things, submit a stewardship plan to the Department of Toxic Substances Control. This bill is currently held under submission in the Assembly Appropriations Committee.

- AB 2398 (Perez) Product stewardship: carpet. Introduced Feb. 19, 2010 .? Last amended on May 28, 2010.? This bill would require, among other things, carpet manufacturers to submit, individually or through a stewardship organization, a product stewardship plan to CalRecycle.? This bill is active and currently scheduled to be heard in the Senate Environmental Quality Committee on June 28, 2010.

-The CalRecycle EPR Team

To subscribe to or unsubscribe from the Extended Producer Responsibility listserv or other listservs, please go to http://www.calrecycle.ca.gov/listservs.

While this legislation obviously does not concern packaging, it does help—at least for me—convey how these concepts may be applied to packaging waste in the future.

Tune in tomorrow to learn about, or attempt to learn about, how to quantify the environmental burdens associated with using inks, laminates and adhesives on fiber-based packaging applications. Its certainly is confusing!

Thanks for listening! My blog has had over 1,300 views! I feel like Julia from Julia and Julia! SOOOO exciting!

Read More

The post of all posts!

Posted by Chandler Slavin on Oct 16, 2012 11:06:00 AM

Happy Friday! This Saturday is my sister’s bachelorette party at Cuvee in Chicago, which is a super posh champagne lounge. I will let you know if I see any celebrities!

So I FINALLY finished my work on PET recycling for a Canadian retailer, which is good, as I leave on Tuesday!

Check it out! It’s sort of a lot, and it’s really detailed, so sorry if I bore you! Oh, and it’s broken into a couple different sections:
    1. Summary of a super huge document titled, “Best Practices and Industry Standards in PET Recycling.”
    2. Supply and demand of PET bottles post consumer, North American context.
    3. Supply and demand of PET thermoforms post consumer, North American context.
    4. Interview with StewardEdge and Stewardship Ontario’s Plastics Market Developer.
    5. Case studies of PET recycling, bottle to bottle, bottle to thermo, and thermo to bottle.
Seriously, this is the post of all posts! And when I copied and pasted my report into the Blog software, it messed up my outline--sorry!

Read More

All sorts of stuff

Posted by Chandler Slavin on Oct 16, 2012 11:01:00 AM

For those of you who have been following my blog, you are aware that our clamshell recycling initiative has sort of come to a stand still:

We determined why PET thermoforms are not recycled (lack of investment in the infrastructure due to quantity, quality, supply and demand issues) and the problems with including RPET thermoforms in PET bottle bales (different IVs, melting points, fear of contamination, etc.) While we did determine that our RPET clams and PET bottles are “read” the same via an optical sorter, when the mixed bales of RPET thermos and PET bottles make it to the processor, the thermos are thrown out and not recycled along with the PET bottles.

Consider the following article published in PlasticsNews, which does an amazing job summarizing all my research to date:

NAPCOR puts thermoformed PET on docket

By Mike Verespej

Posted May 24, 2010

Although blow molded PET and high density polyethylene bottles get most of the plastics recycling attention, a potentially large market looms on the horizon, presenting an opportunity and a challenge for the recycling industry — thermoformed PET containers.

In 2008, 1.4 billion pounds of thermoformed PET packaging was produced in the U.S and Canada. But by 2011, that market could grow to be one-half the size of the PET bottle market, which is the largest category of recycled plastic resin, said Mike Schedler, technical director for the National Association for PET Container Resources in Sonoma, Calif.

“The market is growing rapidly because of natural growth and conversion of products from polystyrene and PVC,” said NAPCOR’s Schedler.

But growth in thermoformed PET packaging and pent-up demand for recycled PET in those packages doesn’t automatically translate into a waste stream that can be turned into an end-market opportunity, he said. “The market is not the issue. The issue is moving it through the reclamation system.”

For the past 18 months, NAPCOR’s Thermoforming Council has been working with recyclers and material recovery facilities in the U.S. and Canada to address an array of technical issues, as well as difficulties presented by a huge variety of sizes and shapes of clamshells, boxes, trays, cups and lids.

Schedler said the council has three main objectives in regard to thermoformed PET.

“We have to remove the obstacles and create an infrastructure that will give PET thermoformed packages the same recycling opportunities as PET bottles,” he said. “And we have to do it in a way that is acceptable to existing collection systems and processes, and without jeopardizing the PET bottle recycling stream.”

Last, he said, “We have to support PET packages and do the things we did in the late 1980s to facilitate recycling of PET bottles.”

The council also is conducting a thermoformed packaging compatibility study to evaluate different streams of packaging and how well they meet industry protocols for fiber, sheet and bottles applications that have been developed by the Washington-based Association of Postconsumer Plastic Recyclers.

Specifically, the study is looking at dedicated thermoformed packaging bales manually removed from MRFs without auto-sort capabilities, mixed bales of PET bottles and PET thermoformed packages at MRFs with auto-sorting equipment, and mixed rigid plastic bales.

“We will convey that data and our observations to PET reclaimers,” Schedler said.

A fourth possible stream — cups from arenas and stadiums with PET recycling programs — will be addressed later.

“I could see separate recycling programs within stadiums for cups, and, to a certain degree, clamshells,” he said. “But I don’t see that happening at MRFs with auto-sort equipment.”

The industry is working to overcome technical hurdles that currently keep thermoformed PET packages from being recycled in tandem with bottles. Among them:

* Look-alike plastics like oriented polystyrene, polylactic acid and PVC containers that are difficult to sort from thermoformed PET packaging, either manually or in auto-sorting operations.

* Adhesives used on pressure-sensitive paper labels are different from those used on PET bottles and could cause yellowing.

* Some direct printing.

* Different additives than in PET bottles.

* Flake geometry concerns.

* Wide variability in intrinsic viscosity.

“We understand what it takes to do this work and we are rolling up our sleeves to do it,” Schedler said. “We want to make PET thermoformed packaging recycling a reality and to position PET as the environmentally preferred package of choice.”

Copyright 2010 Crain Communications Inc. All Rights Reserved.

In my last post, I discussed a company that is going to buy balled PET bottles and PET/RPET thermoforms from MRFs for reprocessing into the next generation of thermoforms. While I obviously have some questions and concerns in regard to the logistics of this approach, I feel like this is a step in the right direction. However, I feel that for Dordan, and the plastics industry in general, it is important to work on the residential recycling infrastructure level, as that is what the consumer has access to and informs his/her understanding of the “sustainability” of a given material. That being said, while a closed-loop system is awesome and a direction we would like to move, I will be focusing more on integrating our packages into the American recycling infrastructure in general because I really think that would resonate with consumers and the larger public. Additionally, the work I am doing with Walmart-Canada works on the residential level, as opposed to the closed-loop system level. If they can figure out a way to recycle PET thermoforms with or in addition to PET bottles, then hopefully, so can we.

Today I had a phone interview with a contact from StewardEdge, which is an organization in Canada that has their hands in issues pertaining to extended producer responsibility. This contact, however, works with Stewardship Ontario to develop markets for plastic post consumer. Our conversation today ROCKED because not only did he confirm my understanding of recycling, but he provided validation that our approach is one of relevance and that our goals are represented by our Canadian neighbors. So I am not alone after all, hurray!

Anyway, he explained that unlike the States, that which is driving recycling in Canada is Stewardship Ontario, which is an organization like Fost Plus in Belguim, which takes money from industry to manage the cost of said industry’s packaging waste. In other words, because there is legislation on the books in Canada that REQUIRES producers to fund the recovery of their packaging post-consumer, organizations like Fost Plus in Belgium and Stewardship Ontario in Canada developed to help producers meet said requirements.

Let me back up. In 2002 Canada’s Waste Diversion Act mandated that industry has to pay for 50% of the net cost for municipalities to run their Blue Box program. The Blue Box program is similar to curb side recycling in the States; however, they encourage the recycling of a lot more materials than is encouraged in the States.

The “designated” material types accepted for recycling via the Blue Box Program are listed here:? http://www.stewardshipontario.ca/bluebox/pdf/materialcategories.pdf.

Anyway, Stewardship Ontario was set up specifically to collect that money from industry and give it to the municipalities to manage packaging waste.

There are different fees for different materials, depending on the ease of recovering said material post-consumer. In other words, the harder a package is to recycle or recover, the higher the associated fee will be.

The fees change every year; here’s the latest: http://www.stewardshipontario.ca/bluebox/fees/fees_rates.htm.

For example, if you sold a polystyrene container into the Canadian market, you would be required to pay 24.65 cents per kg. These are real costs that affect the entire supply chain. PS is expensive because it is so lightweight (EPS is 98% air, 2% resin) there is no economical way to collect it for reprossessing (think shipping…); that is why EPS is one of the materials of focus for the MOC, because economically it is impossible to recycle…

Wow have I rambled. Sorry for the all over nature of this post; I have a point, I swear!

Tune in Tuesday (sisters taking a vacation!!!) to figure out where I am going with this and what needs to happen in the States to integrate thermoforms into the existing recycling infrastructure.

Tootles!

Read More

Happy Monday Funday!

Posted by Chandler Slavin on Oct 16, 2012 11:00:00 AM

Happy Monday Funday!

The company that I made the “Sustainability and Packaging” presentation for, which I posted to my blog on Friday, sent me the following email after receiving said powerpoint (I sent it early for confirmation of its content):

“180 slides is way too long, even for a medical convention…”

Ha!

How do you provide an “overview of sustainability” in 60 slides, which is what this company suggested? I guess I am just as dilligent a powerpointer as I was a student; I was one of the special few who had to speak with my professors about exceeding the page limits for term papers—old habits die hard…

Anyway, tomorrow’s the day: My big presentation for a giant company on all things “Sustainable.” I am going to wear my new power business suit and fab heels AND I took my face piercing out several weeks ago so I look totally business-like.

For today’s post I thought I would reflect on a recent happening in our industry, which was convered on greenerpackage.com, PlasticsNews, and other misc. packaging publications. Because the company in question is a competitor, my superior was hesitant about me articulating my questions in a public forum i.e. on greenerpackage.com. Therefore, I decided to address this tid bit in my blog as it is not an in-your-face forum because I totally respect this company and the work they are doing in sustainability.

Consequentially, all reference to this company has been removed so as not to ruffle anyone’s tail feathers.

Here is the article:

Company X? has announced that it will construct a closed-loop recycling facility in Somewhere America to grind and wash post-consumer bottles and thermoforms for processing into its namebrand sheet products. The company says it is reducing the total carbon footprint of its product by bringing the material supply chain closer to production and offering its customers more choices of materials, including up to 100% post-consumer content PET.

?“We’re excited to bring bottle cleaning and sheet production together in a continuous process loop,” says company CEO. “Our factory design will streamline operations while delivering the recycled sheet products the market requires.”

Company X notes that it is among the first thermoforming companies in the food and consumer packaging industry to implement its own in-house recycling. With the new facility, the company will receive curbside-collected bottles to clean, grind, and extrude into sheet. Reducing the number of bottles going to landfills while providing high-quality material for customers has long been a goal for the company. Company X has been using recycled content in its packaging for more than 15 years, and over the last seven, it has diverted more than 1 billion discarded bottles from landfills.

While Company X has extruded sheet for internal use for 20 years, this marks the first time it will sell its namebrand sheet on the open market.

In addition to namebrand post-consumer rPET, the facility will produce LNO (letter of non-object) flake, allowing food contact with recycled material. Company X? has also commercialized an RF-sealable rPET grade of material to address customers’ bar sealing requirements for PET. Company X says that with only minor process adjustments, this material is a direct replacement for PVC sealing applications.

The recycling facility will be completed in two phases. In phase one, Company X will be adding an additional extruder for its namebrand rollstock. This will be completed in the third quarter of 2010. Phase two will be the addition of the bottle washing equipment, which is scheduled to be operational in the first quarter of 2011, with plans for additional extruders to follow.

Company X’s CEO said that integrating the bottle washing and grinding makes sense, given the amount of post-consumer material the company uses. With the completion of the in-house recycling facility, the firm will be able to streamline the recycling process to ensure that raw material meets Company X’s high standards.

Seeing as how I have been trying to figure out a way to integrate our RPET thermoforms into the existing PET bottle recycling infrastructure, I have A TON of questions for Company X.?

If any of you fine packaging and sustainability friends have any insight, please don’t hesitate to share!!! Sharing is caring!
    • What are the specs of the bales of thermoforms Company X is buying from the MRF?
    • Are they only PET thermoforms or are they mixed material thermoform bales?
    • If only PET thermoforms, is there enough QUANTITY of these types of packages available for the recovery of PET thermoforms to be economically sustainable?
    • How do they collect ONLY PET thermoforms without collecting “look a likes” like PVC, which will completely compromise the integrity of the PET bale, or PETG, which has a lower melting temperature and therefore adds inconsistencies to the recovery process?
    • Are you planning on integrating the PET thermoform scrap with the PET bottle scrap and extruding together? If so, how will you handle the different IVs between sheet grade PET and bottle grade PET?
    • If buying mixed material thermoform bales from the MRF i.e. PET, PETG, PP, etc., how are the different resins sorted for recovery? Are they blended together to create a low-grade, mixed resin flake for down-cycling applications? If so, who is buying this low-grade, mixed resin flake?
    • What kind of sorting technology is utilized to be able to generate a clean, quality stream of PET thermoforms for Company X to grind, clean, and extrude for direct food-contact packaging?
    • How are you competing with Asia for PCR PET?
While I am tickled pink that Company X is recovering thermoforms post-consumer in a closed-loop system, I don’t know how they are doing it! Perhaps the point, no?

That’s all for now; wish me luck tomorrow on my presentation!

Read More

Holly Toledo!

Posted by Chandler Slavin on Oct 16, 2012 10:59:00 AM

Happy Friday!

So I have been working on a presentation on everything sustainability for one of Dordan's customers. Sustainability and Packaging 101, per se.

Anywoo, it took me two days and 190 slides to finish, but I am FINALLY DONE!

It's jam packed with good stuff--basically a summary of all my work to date--so check it out!

Sustainability and Packaging Presentation, Blog

Enjoy the heat-wave this weekend, my fellow Chicagoians!

Also, please do not reproduce or distribute without my written consent. Thanks!

Read More

Day 33: Dec. 11th, 2009

Posted by Chandler Slavin on Oct 16, 2012 10:57:00 AM

The next day I arrived to the office to find the following email that confirmed the results of our RPET samples’ test, which I had verbally received from another WM contact the day before:

Hi Chandler,

After speaking with our plant manager in Grayslake, PET clam shells should be recoverable from the recycling stream via optical and manual sorts. I can't say that's the case at all WM recycling facilities, or non- WM competitive facilities, so take that for what it's worth :). The material would end up in our PET bales.

However, that does not mean that the PET blister packs are the "same" as bottle grade PET bottles… as I understand it, the PET bottles have an IV rating of 0.78-0.80, or a "high rigidity," that bottle makers require. I do not know what UV rating your blister packs have, so I would recommend you discuss the technical aspects of your products with your engineers and your suppliers to determine the IV rating and other compatibility issues.

The main issue at this point, based on my research and discussions internally here at WM, is that any non-bottle PET that gets into a bale is typically discarded for landfill upon receipt at a PET bottler, even if a collection and processing company like WM can sort the PET blister packs from the recycling stream. Again, perhaps you can confirm or research this further with your suppliers.

I hope this helps! Good luck with your project. 

Hmmmmmm…

I then sent our head engineer the following inquiry:

Hey,

Do you have any idea what the “IV” of our supplier’s RPET is?

Thanks!

Chan

After a delectable lunch of an Italian beef with sweet peppers, I returned to find the following:

Spec for supplier’s RPET is IV>= 0.65; I believe it’s typically between 0.70 and 0.75.

Hope this helps.

I then checked the email from WM… “PET bottles have an IV rating of 0.78-0.80, or a ‘high rigidity’…”

Well, that’s not too terribly different than our 0.75 IV…now I am confused.

Tune in tomorrow to learn more about recycling in America!

AND check out this website that my contact from the APR suggested to find buyers of post-consumer plastic scrap: http://www.plasticsmarkets.org/. I just found it so I will let you know what I can find out in regard to who buys bales of thermoforms post-conumser. YIPEEEEEEEEEEEE.

Read More

Bottle Box

Posted by Chandler Slavin on Oct 16, 2012 10:56:00 AM

This is awsome and all I want to say for today:

http://www.youtube.com/watch?v=WRPYccEXt-8

This company is super cool--they buy baled PET bottles and clean, grind, flake and extrude the material into RPET clamshells.

I am making a giant graph of all my research on recycling so get excited!

Tootles!

Read More

SUBSCRIBE TO OUR BLOG:

LATEST POSTS: