Blog

Summary of Plastics Forming Enterprise's presentation, "Recycling of PET Labeled Thermoforms and Bottles"

Posted by Chandler Slavin on Oct 18, 2012 9:37:00 AM

...[please see yesterday's post for context as today's post picks up where that one left off]...Also invited to participate in the task force meeting was the President of Plastics Forming Enterprise LLC., who was heavily involved with the development of APR’s Design for Recyclability Guidelines for PET bottles in the early 1990s. To make a long story short, this guy knows a thing or two about plastics recycling. His company is marketed as “an independent full service testing and R&D company serving the plastics, packaging, recycling and consumer products industries worldwide with a range of services.” As such, he is very well versed in the technical barriers keeping certain packaging/materials from being recycled and how recycling markets are generated and sustained.

His presentation titled “Recycling of PET Labeled Thermoforms and Bottles,” was one of the more precious compilations of insights into the technicalities governing PET bottle vs. PET thermoform recycling I have stumbled upon: For those of you who follow my blog regularly, you will recognize that the approach to PET thermoform recycling (and therefore what is considered a contaminate) has always been ambiguous—do you recycle PET thermoforms WITH bottles or in a separate stream? According to this gentleman, the answer is to recycle PET thermoforms WITH PET bottles eventually; it is just a matter of time, investment, and trial and error until recyclers and buyers gain the confidence into the value of PET thermoform material to sustain the collection and reprocessing there of. Good news, right?!?

What follows are some take-aways from this presentation:

Pressure-sensitive labels are the majority of labels used on thermoformed containers sold at retail. They consist of adhesives, substrate (paper vs. plastic), inks, coating, and laminate.

The known obstacles to recycling thermoforms with label/adhesives include: Sorting/contamination removal, material variability, mechanical engineering issues, misc. technical issues.

The known obstacles to recycling thermoforms with labels include: Look-alike contaminates i.e. PVC thermoform looks like a PET thermoform, wide variability in IV, package shape, direct print, different adhesives, different additives, fluorescence, flake bulk density, paper labels.

There are physical differences between PET thermoforms and PET bottles. While bottles have high IV, high bulk density and a unanimous design and material i.e. thin screw-top PET bottle, thermoforms have low IV, low bulk density, and heterogeneous shapes and material constituents.

The labels on PET bottles are typically plastic; the labels on retail point of purchase thermoforms are predominantly paper and continuously be increasing to plastic.
o It is generally understood that the move away from paper labels is the current issue at hand in the plastics recycling market (see APR’s Design Guidelines, pg. 12).
o However, the practical side of recycling PET thermoforms will need consideration of paper in the future i.e. POP label application.

The APR Thermoform Label and Adhesive protocol follows these steps:
o Apply label
o Grind
o 1st Elutriation
o Wash/Sink float
o 2nd Elutriation
o Plaque
o Analysis

PFE has developed a screening evaluation that focuses on adhesive performance (this takes a label and adhesive that has been applied to a specific package):
o Ground per APR guidelines
o Washed per APR guidelines
o The resulting flakes are analyzed for separation of the label from the flake (paper vs. plastic label impacts this test insofar as paper labels tend to “stick” to flake)
o The resulting flakes are analyzed for impact of inks and the impact of residual adhesive on the flake

In Europe, a common test evaluates the solubility of adhesives; this protocol does not look at the potential impact of:
o Soluble adhesives that have gone into solution during the wash and rinse process and redeposit onto the processed PET flake;
o Residual adhesives that remain tacky are causing problems where labels and flake become stuck together during reprocessing, hindering the removal potential of a given label.

Ideal PET label substrate properties:
o Floatable
o Light weight
o Maintain printed inks
o Physical properties for better separation

Ideal PET label adhesive properties:
o Needs to dissolve into solution and not reapply itself OR
o Adhesive to remain with the label and not be tacky

PFE’s Screening Evaluation is designed to understand three basic areas where label and/or adhesive performance is crucial to meeting the guidelines set by the APR:
o Separation from flake
o Removal through Elutriation and Sink Float
o Adhesive solubility and potential impact on flakes
o Impact of inks on wash water and flakes (if printed)

It was concluded that pressure sensitive labels are a critical part of the entire package. Therefore it should not be isolated as the main indicator of adhesive contamination potential without considering the interaction of the other label components.

Whoa!

Read More

And the plot thickens! Dialogue on PET thermoform recycling and APR's adhesive/label protocol

Posted by Chandler Slavin on Oct 18, 2012 9:36:00 AM

Hello my packaging and sustainability friends!

Sooo I don’t know if you read that article I referenced a post or two ago in Machine Design Magazine about PET thermoform recycling BUT you should because it continues the dialogue on clamshell recycling. Click here to read “Good News and Bad News about Recycling Thermoforms.” The interview for this article was more technical than those previous because the audience of the publication is engineers; the site’s tagline is “By engineers for engineers.” Anyway, after I received the reporter’s first draft of the article and performed my edits I sent it to several colleagues in the waste management industry to get their feedback as I was a little intimidated by the scope and breath of the piece. Thankfully I heard back from my friend who is the North Carolina Recycling Program Director and familiar with the barriers keeping PET thermoforms from being recycled in the Carolinas from the perspective of the state. As a side note, I met this gentleman two years ago at a Walmart SVN conference when I bombarded him with questions on thermoform recycling after his presentation (this was before I published my “Recycling Report?”). He was such a doll, patiently explaining his perspective on the matter, and has been a sounding board for my inquiries ever since. His comments are below:

You are doing an amazing job of trying to move thermoform recycling into the mainstream. It is a daunting task. As much as we try to pay attention to it and have dialogue with various players here in the Carolinas, we have yet to have any breakthroughs. There is an interesting trend for communities to expand plastic collection to non-bottle containers, but the situation on thermoforms is always ambiguous – are they in or are they out? Our bigger MRFs are definitely employing optical sorters to divert PET from the MRF stream but no one seems to have a handle on whether thermoforms go along for the ride and, if they do, if mixing them with bottles is okay with the markets. Or whether a secondary sort after the optical sorter is needed.

But I think you did a fine job of describing what is a surprisingly complex recycling process. There is so much change going on in the industry right now, it is frankly bewildering. I think folks see where we need to go, but it is really hard to figure out how to get there. When it comes to thermoforms (like a lot of other things), I think we just need a few breakthroughs with some “early adopters” who solve the chicken-egg dilemma of collection and then processing/marketing the materials. To that end, I am hopeful that the NAPCOR projects yield some useful results.

I’ve got a lot on my plate, but if you need any help in educating folks (reporters, or whoever) about some of the nuances of the recycling and waste management world, I’d be glad to weigh in. I really appreciate how much energy and thoughtfulness you are bringing to this work… Hang in there – you are doing great!


Aw shucks, whata guy.

This dialogue coincides with some other happenings in PET thermoform recycling, including an advertisement I was forwarded from the editor of Canadian Packaging Magazine showcasing the different “APR-approved label solutions” from Avery Dennison. Click here to see the ad. As per previous conversations, NAPCOR and others found that the adhesives used on thermoform packaging was too aggressive, rendering PET thermoforms unrecyclable insofar as the adhesive would gunk up the material during the process of recycling. Consequently, APR established a protocol in which adhesives used on labels had to be approved for application on thermoforms in Canada. Having received the ad from Avery, I am confident that the industry is taking this initiative seriously and developing adhesives and labels that are conducive to PET thermoform recycling. Hurray!

And the plot thickens!

While at the last SPC meeting I met a rather rambunctious fella who did not fancy the APR’s work in these regards; he represents an industry group of laminated paper products manufacturers. After some playful banter (I of course applaud the efforts of the APR looking to facilitate thermoform recycling by eliminating those elements that act as deterrent to recycling while he found fault with the approach of the APR), we agreed to schedule a follow up conference call. Months later I am happy that such a call is finally coming to fruition, scheduled for this Thursday! I look forward to learning about his perceptive on the matter and as always, promise to share his insights with you, my sustainable packaging enthusiasts.

AND I just received word that the S+S Sorting pilot, which looks to understand the technical differences between reprocessing bottle-grade PET vs. thermoform-grade PET, has been pushed back 3-4 weeks; more details to come.

This has nothing to do with any of the above BUT check out this super adorable article about my father and our family business. We even got the centerfold of this week’s Plastics News! How sexy!

Read More

TLMI's "Recycling Friendly Adhesive Formulations and Compounds Task Force"

Posted by Chandler Slavin on Oct 18, 2012 9:36:00 AM

Read More

Design for Recyclability: bottles first, thermoforms next?

Posted by Chandler Slavin on Oct 16, 2012 3:02:00 PM

Read More

SUBSCRIBE TO OUR BLOG:

LATEST POSTS: